Calculate Mean & Standard Deviation (for Sharp EL-W531 series)
I have tested this on the Sharp EL-W531S and SHARP EL-W531XM calculators.
Take note of the following buttons:
Comma , or (x, y) button
CHANGE button
Step 1: Clear memory
Press 2nd F, followed by ALPHA to reach the following screen:
Press 1 to select ‘1: MEMORY’:
Step 2: Statistics mode
Press MODE:
Press 1 to select ‘1: STAT’:
Press 0 to select ‘0: SD’
Step 3: Enter data
Let’s consider an example.
$x$ | 5.5 | 15.5 | 25.5 | 35.5 | 45.5 |
---|---|---|---|---|---|
Frequency | 5 | 10 | 5 | 18 | 2 |
Let’s enter this data in the calculator.
Enter the first column:
Enter 5.5
Press comma , button
Enter 5
Press CHANGE button
If you do not get the screen above, clear memory (Step 1) and start over.
Enter the remaining data.
(Optional) Use the ▲ ▼ directional keys to check whether the data is entered correctly.
Press ON/C to return to the main screen.
Step 4: Calculate Mean & SD
To calculate mean, press ALPHA, followed by 4 and finally =.
To calculate standard deviation, press ALPHA, followed by 6 and finally =.
Once done, press MODE followed by 0 to switch back to normal operation.